Before ordering a replacement headstone, matching grave marker, added inscription, or companion memorial, document the existing marker carefully. This reusable worksheet helps you capture measurements, material, lettering, symbols, plot details, and clear photographs so a cemetery office or monument company has the information needed to prepare an accurate quote.
Overview
Measuring an existing headstone is more than recording its height and width. A marker may include a separate base, foundation, bronze plaque, vase, raised lettering, carved decoration, or evidence of settling and damage. Small differences can matter when you are trying to match an older gravestone or add a second inscription.
Take measurements during a planned cemetery visit, and record what you can without moving, lifting, cleaning, or altering the memorial. If the stone is leaning, cracked, unstable, or partly buried, do not attempt to straighten or excavate it yourself. Photograph the condition and ask the cemetery or a qualified monument professional how it should be assessed.
Use the worksheet below as a field record. Write down the date, identify who took the measurements, and keep the original photographs with the notes. A vendor may still need to verify dimensions in person, particularly for installation, foundation work, or a replacement that must comply with cemetery regulations.
Basic field worksheet
- Visit date: ____________________
- Cemetery and section: ____________________
- Plot, lot, or grave identification: ____________________
- Person commemorated: ____________________
- Measured by: ____________________
- Weather and ground condition: ____________________
- Purpose: replacement / matching marker / inscription addition / repair estimate / family records
Checklist by scenario
For a replacement headstone
Record the complete outside dimensions of every visible component. Measure the memorial face from its widest and tallest points, then measure the base separately. If the headstone has more than one base section, record each piece rather than combining them into one number.
- Overall visible height, width, and thickness of the upright stone or plaque
- Base height, width, depth, and the number of base sections
- Foundation or concrete pad dimensions, if visible
- Shape of the top: flat, arched, serpentine, peaked, rounded, or another profile
- Material and apparent color, such as granite, marble, bronze, concrete, or another stone
- Finish: polished, honed, rough, pebbled, cast, painted, or partly weathered
- Visible cracks, chips, stains, flaking, leaning, gaps, or settlement
- Any attached vase, photo, emblem, plaque, or metal component
Do not assume that a replacement should copy only the visible stone. The cemetery may have requirements for foundation size, marker thickness, overall height, material, or placement. Contact the cemetery before requesting a final design or ordering a grave marker.
For a matching marker or companion headstone
When the goal is visual matching, document appearance as carefully as size. Photograph the existing memorial beside nearby landscaping or another fixed reference, but do not rely on color alone because shade, weather, and camera settings can change how a stone appears.
- Measure the face, base, and foundation independently.
- Note whether the front surface is flat, curved, sloped, or shaped.
- Record the position of the inscription relative to the edges.
- Describe lettering style, capitalization, spacing, alignment, and finish.
- Record decorative elements, religious symbols, military emblems, flowers, borders, or portraits.
- Note whether the existing marker is centered, offset, paired with another marker, or aligned with a row.
For a companion headstone, also measure the available space across the grave or family plot. A cemetery may limit the footprint or require approval for a particular orientation. A guide such as How to Replace a Damaged or Missing Headstone can help organize the approval and ordering process.
For an added inscription
Measure the unused area, not just the entire stone. Use a ruler or tape measure to record the clear space above, below, and beside the existing inscription. Photograph the full face and take closer images of every line of text.
- Available inscription area: height ________ width ________
- Existing lettering height, if measurable: ________
- Number of existing lines: ________
- Approximate spacing between lines: ________
- Letter style and finish: ________
- Proposed wording and punctuation: ________
Transcribe the existing wording exactly, including initials, dates, abbreviations, punctuation, and spelling. Compare your transcription with family records before submitting it to a monument company. The Headstone Inscription Planner offers additional guidance for reviewing wording before engraving.
For a condition or restoration assessment
Take measurements and photographs before any cleaning. Record biological growth, discoloration, open seams, displaced pieces, surface loss, metal corrosion, and the condition of the lettering. Note whether the issue appears on the stone, the base, the foundation, or the surrounding ground.
Do not use household cleaners, wire brushes, paint, sealants, or pressure washing as part of documentation. Treatment can change the surface and may make a professional assessment more difficult. For a seasonal inspection routine, see the Gravestone Care Calendar.
What to double-check
Use a consistent measuring method
State whether each measurement is in inches, centimeters, or another unit, and use the same unit throughout the worksheet. Measure from edge to edge without including surrounding grass, soil, decorative objects, or a nearby marker. If an edge is irregular, record the greatest width and explain how you measured it.
For thickness, measure at an exposed side or ask the vendor whether an estimate is sufficient. Never pry up a stone or remove a base to reach a hidden dimension. If the foundation is not visible, write “not visible” rather than guessing.
Photograph with scale and context
Take a full-front photograph, a rear or side photograph when accessible, and close-ups of the inscription and decorative details. Include a ruler, tape measure, or another clearly identified scale reference in detail photographs when it can be placed safely without touching or obstructing the memorial. Take one wider image showing the marker’s location in relation to paths, trees, neighboring markers, and plot boundaries.
Keep the original files. Rename copies with the cemetery, name, date, and view, such as “Smith-family-headstone-front-2026-11-05.” If photographs show personal information or family members, store and share them thoughtfully.
Confirm site and cemetery information
- Ask the cemetery who owns or controls the memorial and who may authorize work.
- Request current specifications for dimensions, materials, foundations, placement, and installation.
- Confirm whether the cemetery requires an approved monument company or permits before work begins.
- Provide the vendor with the grave location, not only the person’s name.
- Ask whether the site has access limits, seasonal restrictions, or special instructions for delivery.
Rules vary by cemetery and location, so treat your field measurements as preparation for a quote, not as permission to install. The Headstone Installation Day Checklist can help you prepare for the next stage.
Common mistakes
- Measuring only the front face: The base, foundation, and attachments may affect the replacement design and installation.
- Guessing hidden dimensions: Mark unavailable information clearly so the vendor knows what must be verified.
- Using one photograph: A single image may hide leaning, thickness, edge profiles, or damage.
- Cleaning before documenting: Cleaning can remove clues about the original finish or condition.
- Transcribing from memory: Read every line carefully and have another person check names and dates.
- Ignoring the surrounding plot: A marker can fit its own measurements but still conflict with plot boundaries or nearby memorials.
- Ordering before approval: Confirm cemetery requirements before paying a deposit or finalizing a custom gravestone.
- Failing to save records: Keep the worksheet, photographs, quotes, approvals, and final design together for future repairs or additions.
If a warranty, repair, or replacement dispute later arises, dated photographs and written measurements may help explain the condition at the time of the request. Keep those records with invoices and correspondence; the Headstone Warranty and Repair Claims checklist covers documents commonly worth saving.
When to revisit
Revisit the worksheet whenever the purpose or condition changes. Update it before requesting new quotes, after a cemetery confirms its rules, when a previously hidden foundation becomes visible, or when weathering, settlement, or damage changes the marker. A second visit may also be worthwhile after a family approves final inscription wording or selects a matching material.
Review the record before seasonal cemetery visits and before arranging installation. Compare the photographs with the current condition, verify the plot identification, and check that the vendor has the latest dimensions and design notes. If the marker has shifted, cracked, or become unstable, stop measuring and contact the cemetery or a qualified professional.
Action step: Save a copy of this worksheet on your phone or print it for the cemetery visit. Bring a tape measure, ruler, pencil, and a way to record photographs. Afterward, send the completed notes and selected images to the cemetery and monument company, clearly labeling measurements that still require professional verification.